| Customization: | Available |
|---|---|
| Type: | Electric Heating Plate |
| Material: | Ni-Cr Wire |
|
Still deciding? Get samples of US$ 8/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Ceramic far-infrared heating element is made of high emissivity glaze layer, and ceramic as the substrate, which have good thermal shock performance and a high-quality nickel-chromium alloy wire sintered at one time.
Infrared ceramic heater are widely used in pre-heating of plastic sheets for vacuum forming & thermoforming, drying paints, lacquer & varnish curing, drying printing inks, drying textiles, activating adhesives, removing surface water from objects or moisture removal from fabric and paper, animal husbandry and rearing.The ceramic IR heaters are highly efficient.Ceramic infrared heater offers precise targeting and control with minimal peripheral heat. It is possible to apply heat only where and when it is required. The energy in an infrared heater is transmitted at the speed of light from the element to the product. A constant rate of heating is obtained because the source temperature is normally much higher than that of the product even at the end of the heating cycle.
Features:
1. Good chemical stability, strong oxidation resistance and high corrosion resistance;
2. Use non-radiant surface with small heat loss and energy saving;
3. matrix (not glaze) heated to 800 ºC in cold repeated dozens of times no crack;
4. The radiating element (finished product) is electrified and heated to the rated power, and the product is immersed in cold water for 40 times without loss after power off;
5. Component radiation rate is greater than 0.9;
6. The service life can be more than 5 years.
|
Specification
|
||
|
Size(mm)
|
Type
|
Power
|
|
60*60
|
Curved/Flat/Hollow
|
125W-250W
|
|
122*60/120*60
|
Curved/Flat/Hollow
|
125W-500W
|
|
122*122/120*120
|
Curved/Flat/Hollow
|
150W-750W
|
|
245*60
|
Curved/Flat/Hollow
|
150W-1000W
|
|
245*80
|
Curved/Flat/Hollow
|
150W-1000W
|
Different Terminal Connectors
1.PET perform heating in stretch blow molding machines
2.Printing Ink drying in offset machines
3.Screen-printing curing on T-shirts and textiles
4.Powder coating curing
5.Rubber coated drying
6.Sterilizing/mirror coating drying in glass industries
7.Paint baking
8.Paper coating drying
9.All type of lamination Preheating prior to embossing
){kind=link}